x
Send Your Inquiry Today
Quick Quote
  • Driver IC SOP28 550X445
  • TPG2136
  • Driver-IC-SOP28-550X445-DET5
  • Driver-IC-SOP28-550X445-DET4
  • Driver-IC-SOP28-550X445-DET2
  • Driver IC SOP28 550X445
  • TPG2136
  • Driver-IC-SOP28-550X445-DET5
  • Driver-IC-SOP28-550X445-DET4
  • Driver-IC-SOP28-550X445-DET2

700V Three-phase Gate Driver IC TPG2136 Topdiode (IRS2136)

  • Latch Protection: withstand 0.5 A reverse current
  • Ability to Handle Negative Voltages (-10 V) at Inputs
  • Low Output Impedance
  • Two Independent Gate-Drive Channel
  • 4-A Peak Output Current
  • 4.5 to 25-V Single-Supply Range
  • High Ability of driving capacitive load
  • Rise/Fall time matching
  • Operating Temperature Range of -40 to 125°C
  • Turn on/Turn off Delays: — Ton/Toff =25ns/25ns
  • RoHS compatible

Topdiode 700V Three-phase Gate Driver IC TPG2136 (IRS2136)

TOPDIODE TPG2136 is a high voltage, high speed power MOSFET and IGBT drivers with three independent high and low side referenced output channels for 3- phase applications. A current trip function which terminates all six outputs can be derived from an external current sense resistor. An enable function is available to terminate all six outputs simultaneously. Over current fault conditions are cleared automatically after a delay programmed externally via an RC network connected to the RCIN input. TPG2136 s integrated with a bootstrap diode to charge the high side, simplifying the peripheral circuit of the chip. The logic input is compatible with standard CMOS or LSTTL output, down to 3.3 V logic.

The floating channel can be used to drive an N-channel power MOSFET in the high-side configuration which operates up to 700 V.

Topdiode TPG2023 is a nice alternative offer for Infineon driver IC IRS2136.

Topdiode 700V Three-phase Gate Driver IC TPG2136 DATA

Topdiode PN TPG2136
Description H-bridge Drive(N+N)
Operating Voltage 700V
Input signal HIN1,2,3
Deadtime 290ns
Ton/Toff (ns) 500ns/500ns
IO+/IO- 0.45A/0.7A
Package SOP28
Cross to Brand Infineon
Pin to Pin Cross P/N IRS2136

Topdiode Hot Selling Products (6)

Topdiode Mosfets Drive IC used on Electric Vehicle Controller

In the electric vehicle market, the importance of light electric vehicles (electric two-wheelers, electric three-wheelers, electric scooters) is becoming increasingly important. As a means of transportation in people’s daily lives, light electric vehicles have the advantages of low investment and operation and maintenance costs, and meet the budget requirements of most consumers. At the same time, it can be charged through the standard power grid. The above characteristics make it a short-distance transportation tool. In the next few years, the number of light electric vehicles will explode. However, users’ anxiety about cruising range is becoming increasingly apparent. How to optimize system cost and efficiency has become an urgent problem that needs to be solved.

TOPDIODE Normal Trench MOSFET series & Super Trench MOSFET series maximize energy efficiency while maintaining reasonable power consumption, and comprehensively improve the switching characteristics and conduction characteristics of the device. In particular, Super Trench technology brings you lower conduction losses and better switching characteristics. Now the second-generation SGT products have an overall performance improvement of more than 20% compared to the first-generation products, allowing you to achieve higher efficiency. At the same time, if you are more concerned about cost, you can also choose the Normal Trench MOSFET series to obtain a higher cost performance.

Topdiode Mosfets Drive IC used on Electric Vehicle Controller
N-channel Trench MOSFET:VDS=60V-100V Ron@10V(max)<8mΩ
N-channel SGT-II MOSFET&N-channel SGT-I MOSFET:VDS=60V-100V Ron@10V(max)<8mΩ
IC:Drive IC

Topdiode Driver IC Applications

White Goods
White Goods
Industrial Power Supply
Vehicle Electronics
What is Driver IC?

A Driver IC, or Driver Integrated Circuit, is a semiconductor device that is used to control and drive other components, such as LEDs, motors, displays, or other devices. Its primary function is to provide the necessary electrical signals to control and power external components efficiently.

How an Driver IC Works?

Here’s a general overview of how a Driver IC works:

Signal Processing:

The Driver IC often receives control signals from a microcontroller or another central processing unit.

These signals may include information about the desired state or intensity of the connected device, such as the brightness of an LED or the speed of a motor.

Voltage Regulation:

Driver ICs typically incorporate voltage regulation circuitry to ensure a stable and consistent power supply to the connected device.

This is important for maintaining the proper operation of the external component and preventing damage due to voltage fluctuations.

Power Switching:

Driver ICs can include power switching elements, such as transistors, to control the flow of current to the connected device.

The switching elements are often used to turn the connected device on or off, or to modulate the power supplied to control its performance.

Current Control:

Some Driver ICs also offer current control features, especially in applications like LED driving. They can regulate the current flowing through the LEDs to achieve consistent brightness and prevent overcurrent conditions.

Protection Mechanisms:

Driver ICs may include protection mechanisms to safeguard both themselves and the connected components. Common protections include overcurrent protection, overvoltage protection, and thermal protection.

Feedback Mechanisms:

Advanced Driver ICs may incorporate feedback mechanisms to monitor the performance of the connected device and adjust the driving parameters accordingly.

This can be achieved through sensors or feedback circuits that provide information about the actual state of the device being driven.

Communication Interfaces:

In some cases, Driver ICs support communication interfaces like I2C, SPI, or UART, allowing them to receive commands and data from a micro-controller or another control unit.

Application-Specific Features:

Depending on the application, Driver ICs may include specific features tailored to the needs of the connected device. For example, a motor driver IC might include features like pulse-width modulation (PWM) control for speed regulation.

What are Features of Driver IC ?

The features of a Driver IC can vary depending on its intended application and the type of component it is designed to drive. However, here are some common features found in various Driver ICs:

Voltage Regulation:

Ensures a stable and consistent power supply to the connected device, preventing damage due to voltage fluctuations.

Current Control:

Regulates the current flowing to the connected device, especially in applications like LED driving, to achieve consistent brightness and prevent over-current conditions.

Power Switching:

Controls the flow of current to the connected device, allowing the Driver IC to turn the device on or off, or modulate the power supplied to control its performance.

Protection Mechanisms:

Includes features such as over-current protection, over-voltage protection, and thermal protection to safeguard the Driver IC and the connected components.

Feedback Mechanisms:

Monitors the performance of the connected device and adjusts driving parameters accordingly, often through sensors or feedback circuits.

Communication Interfaces:

Supports communication interfaces like I2C, SPI, or UART, enabling the Driver IC to receive commands and data from a micro-controller or another control unit.

PWM (Pulse-Width Modulation) Control:

Provides the ability to modulate the output signal by varying the duty cycle of the pulse, commonly used in applications where variable control of power or speed is required.

Integrated Diagnostics:

Offers diagnostic features to identify faults or malfunctions in the connected system, facilitating troubleshooting and maintenance.

Fault Detection and Reporting:

Detects faults or abnormal conditions in the connected device and reports them to the control system for appropriate action.

Application-Specific Features:

Tailored features based on the specific requirements of the application, such as specialized control modes, sequencing, or timing functions.

Low Power Consumption:

Some Driver ICs are designed for energy efficiency, minimizing power consumption during operation to enhance overall system efficiency.

High Efficiency Power Conversion:

In applications involving power conversion, Driver ICs may feature high-efficiency switching circuits to optimize energy transfer.

Configurability:

Allows users to configure various parameters and settings based on the specific requirements of the application.

Compatibility with External Components:

Ensures compatibility with a wide range of external components, making the Driver IC versatile for different applications.

It’s important to note that the features of a Driver IC can vary widely based on the application, and manufacturers may design specialized Driver ICs with additional features to meet the specific needs of certain devices or systems.

Lorem ipsum hdiwp ametvel facilisi

Driver ICs find applications in a variety of electronic systems where there’s a need to control and drive external components efficiently. Some common applications include:

LED Lighting:

Driver ICs are used to control the brightness of LEDs, ensuring stable current and voltage to achieve consistent and efficient lighting.

Motor Control:

In electric motors, Driver ICs are employed to control speed, direction, and torque. They are used in applications ranging from consumer electronics (like fans and appliances) to industrial machinery.

Display Drivers:

Driver ICs are utilized in display technologies, such as LCDs (Liquid Crystal Displays) and OLEDs (Organic Light-Emitting Diodes), to control pixel voltages and refresh rates.

Power Supplies:

Driver ICs play a crucial role in power supply units, regulating voltage and current to ensure stable power delivery to electronic devices.

Audio Amplifiers:

In audio systems, Driver ICs amplify low-power audio signals to levels suitable for speakers or headphones, providing the necessary power to produce sound.

Solenoid and Relay Drivers:

Driver ICs control the activation and deactivation of solenoids and relays in various applications, such as automotive systems and industrial automation.

Sensor Signal Conditioning:

Driver ICs are used to condition signals from sensors, amplifying and processing them before they are sent to microcontrollers or other processing units.

Brushless DC (BLDC) Motor Control:

Driver ICs are employed in the control of BLDC motors, commonly used in applications like computer fans, robotics, and electric vehicles.

Piezoelectric Actuator Control:

In applications where precise control of piezoelectric actuators is required, such as in printers and positioning systems, Driver ICs are used.

 

Photovoltaic (PV) Inverter Control:

Driver ICs are used in solar inverters to control the conversion of DC power generated by solar panels into AC power for use in electrical grids.

 

Thermal Printers:

In thermal printers, Driver ICs control the heating elements responsible for producing printed images on thermal paper.

 

Communication Interfaces:

Driver ICs are employed in various communication interfaces, such as RS-485 or RS-232 drivers, to ensure proper signal transmission between devices.

 

LED Matrix and Display Modules:

Driver ICs are used to control arrays of LEDs in displays, scoreboards, and signage applications.

 

Stepper Motor Control:

Driver ICs are essential for controlling the precise movement of stepper motors in applications like 3D printers, CNC machines, and robotics.

 

These applications highlight the versatility of Driver ICs in various electronic systems, providing the necessary control and power management for a wide range of components and devices.

What are Benefits of Driver IC ?

Driver ICs offer several benefits in electronic systems and applications, contributing to the efficient and reliable operation of devices. Some key advantages include:

Efficient Power Management:

Driver ICs help manage and regulate power distribution, ensuring that connected components receive the appropriate and stable voltage and current. This contributes to energy efficiency and optimal performance.

Precise Control:

Driver ICs enable precise control over external components, such as motors, LEDs, and displays. This precision is crucial for achieving desired performance characteristics in applications like motor speed control or LED brightness modulation.

Enhanced Reliability:

Incorporation of protection features, such as overcurrent and overvoltage protection, contributes to the overall reliability of electronic systems by preventing damage to components during fault conditions.

Simplified System Design:

Driver ICs often integrate various functions into a single package, reducing the complexity of system design. This integration can include voltage regulation, current control, and protection mechanisms, simplifying the overall design process.

Optimized Performance:

Driver ICs are designed to optimize the performance of specific components, such as motors or LEDs, by providing the necessary signals and power in a controlled manner. This leads to improved efficiency and functionality.

Ease of Integration:

Driver ICs are designed to be easily integrated into electronic systems. They often feature standard communication interfaces and compatibility with microcontrollers, making them straightforward to incorporate into existing designs.

Cost Savings:

The integration of multiple functions into a single Driver IC can lead to cost savings in terms of component count, board space, and overall system complexity.

Diagnostic Capabilities:

Many Driver ICs incorporate diagnostic features that allow for the monitoring of device and system health. This facilitates easier troubleshooting and maintenance.

Versatility:

Driver ICs are versatile components that can be applied across a wide range of applications, from consumer electronics to industrial machinery. This versatility makes them suitable for various design requirements.

Energy Efficiency:

Driver ICs designed for low power consumption contribute to overall energy efficiency in electronic systems, making them suitable for battery-powered devices and environmentally conscious applications.

Adaptability to Different Components:

Driver ICs can be designed to drive different types of components, such as motors, LEDs, or displays, allowing for flexibility in system design and application.

Improved System Safety:

Protection mechanisms in Driver ICs enhance system safety by preventing component damage and reducing the risk of electrical failures.

In summary, Driver ICs provide a range of benefits that contribute to the efficient, reliable, and cost-effective operation of electronic systems. Their versatility and integration capabilities make them essential components in many applications across various industries.

Send Your Inquiry Today
Quick Quote
Scroll to Top